Signal strengthen modem or wireless LAN

How to strengthen signal GPRS or 3G signals on modem or wireless LAN for Internet users who use wireless services may already be familiar. Because of course there are some who experience arrest signal wireless LAN or GSM Modem Signals either GPRS or 3G signals are less strong. I consider the arrest signal 1 / 5 to 2 / 5 bars on signal strength is less strong because the experience proved that with strength 1 / 5 to 2 / 5 bar Internet connections are often disjointed.
We can see it on the desktop icon indicator in the lower right corner. Let you see 2 images of small computers near the bar-meter that sometimes lights up when we are browsing the Internet, download or upload. Try browsing or download and watch the indicator. There you will see that the process of browsing, downloading and uploading will be very dependent on the condition indicator. So to overcome this needs to be done by strengthening the wireless signal and both signals GPRS GSM modem or 3G signal.
Typically to capture signals that only 1 / 5 bars or 2 / 5 bars will result in indicators often die and at that time browsing or downloading process stops. That's because the lack of strong catch signal from the BTS or Hotspot. Well ... for the following safety tips to strengthen the signal whether it signals a GSM Modem GPRS, 3G or Signal Signals Wireless LAN
There are three ways to strengthen Signal GSM Modem and Wireless LAN are: Using the External Antenna by using the induction system. This method is usually applied to the modem that is not equipped with an antenna jack for the connector. The cable from the antenna that led to the Device (Modem / Wireless-LAN) is not connected directly with the Device, but in the end a kind of induction coil mounted cable / coil wire diameter of 1mm diameter coil of approximately 5cm (usually made of insulated wire.) Next Device was inserted into the coil. Thus, electromagnetic induction is expected to occur from signals received from the antenna to the Device and vice versa. This method is quite effective for Strengthening Signal Signal 3G or GPRS or wireless LAN. External antenna connector to connect to the internet modem / wireless. This way as we install a TV antenna where there is a connector of the antenna cable must be connected to the TV. This method can Strengthens Signals GPRS or 3G signal is very significant but with the terms of, first, the antenna must be in accordance with the working frequency and Impedance Device Device. Because if there is no compliance, the signal can be weak even drop and place a high VSWR at the Device so that the devices heat quickly and can result in damage, secondly, the Device must have a connector for external antenna. The problem is that not all Internet Modem has the facilities especially the USB Wireless LAN Internet. Using USB Extender USB or extension, is the most inexpensive way to strengthen the signal GPRS or 3G signal though to be a little complicated. Internet Modem / LAN Wereless put in place that is free or as little as possible barriers between the internet modem with BTS or Hotspot or if you can expressway / hitch means if the modem and the base stations that have eyes to see each other. This was certainly the Device should be placed at high altitudes. We can Make a USB Extender with UTP cable used for Internet network in the cafe and put the modem / wireless us above our house.
In addition to Strengthen Signal GPRS, 3G and Signal Signals Wireless LAN, these methods can also be used to strengthen the CDMA signal.

Good luck and do not forget to come back for the next article

Posted in: computer,Internet,Modem,Network